Before Installation - LG OLW480B Installation Manual

Follow the instructions in this Installation Manual to
properly install the product.
If you do not follow the instructions in the Installation
Manual the product may be installed incorrectly and cause
serious injury or damage the product.
Check whether the wall is strong enough to hold the
product before installation, and use the anchors and
screws provided when installing.
If you use anchors or screws other than those specified by
the manufacturer, they may not be able to hold the weight
of the product, and this may cause safety hazards.
Do not clean the product with wet towels or place
heaters or humidifiers underneath it.
Moisture entering the product or steam and heat may result
in fire, electric shock, or damage to the product.
Remove the power cord from the outlet before
installation.
Otherwise, it may cause electric shock or fire.
Make sure that you use the cable gender provided, as
other cables may damage the product connector by
causing friction between the product and the wall. (May
vary by model.)

Before Installation

* Do not use this product for purposes other than to install TVs on walls.
* Be careful when installing and using the wall mount to avoid product damage and safety hazards.
* You can easily install the wall mount by following the instructions in the Installation Manual.
* If the instructions in the manual are unclear, stop installing and contact a service center.
If you are still having problems understanding the instructions after contacting a service center, seek a professional installer to install
the product for you.
* Individuals with mechanical or architectural experience may find it easier to understand this manual and install the product even if
they are not professional installers.
* It is recommended that you install this product only on concrete walls. Issues that may arise due to installation on other materials
(walls made of wood, plywood, bricks, etc.) will not be covered.
* Only install the product on vertical walls.
Do not install the product on walls at angles outside of the normal range, on severely slanted walls, or on the ceiling.
Issues that may occur as a result of installing the product on severely slanted walls or on the ceiling will not be covered.
* Check that the accessories provided with the product are all included before installing. Any damage to or loss of accessories after the
inner packaging has been opened will not be covered.
* Make sure that the accessories are kept out of the reach of children to prevent safety hazards such as suffocation due to the
swallowing of small parts.
* Make sure that all screws are fully tightened.
Applying excessive force to the screws may damage your wall, affect product performance, or cause damage to the product.
* Make sure that the installed TV does not exceed the specified tensile load and that no external force is applied to it.
* To prevent any safety hazards, take care when handling tools during the installation.
<Tools Necessary for Installation>
Phillips screwdriver (manual or electric), 8 mm wrench, leveler, drill, Ø 8 mm drill bit for concrete or Ø 4 mm drill bit for steel
Caution
To install the product or adjust its height after
installation, four or more people are needed.
If you try to handle the product alone, it may fall and cause
injury or damage to the product.
When drilling holes in your walls, make sure you use a
drill and drill bit with the specified diameter. Make sure
that you also follow the instructions regarding the depth
of the holes.
Otherwise, the product may be installed incorrectly and
cause safety hazards.
Keep the product away from sprinklers, detectors, high-
tension wires, power sources, or places where vibrations
or shock from impact are likely to occur.
Wear work gloves when installing the product and do not
use your bare hands.
Otherwise, this may cause injury.
3