Subscribe to Our Youtube Channel
Related Manuals for pico Technology PicoScope 2200A Series
Summary of Contents for pico Technology PicoScope 2200A Series
- Page 1 PicoScope 2200A Series PC Oscilloscopes User's Guide ps2200a.en r1 Copyright © 2013 Pico Technology Limited. All rights reserved.
-
Page 3: Table Of Contents
............................6 6 Warranty ............................6 7 Company details 3 Product information ............................7 ............................7 1 Model selector ............................8 2 PicoScope 2200A Series pack contents and accessories ............................8 3 System requirements ............................9 4 Installation instructions ............................10 5 Connections ..................................10 1 Connector diagrams ..................................10 2 Signal inputs ..................................10... -
Page 5: Welcome
Additional information For full technical specifications, see the following data sheet: PicoScope 2200A Series Data Sheet (MM012) The following manuals explain how to use the API to control a PicoScope 2200A Series Oscilloscope: PicoScope 2000 Series Programmer's Guide: PicoScope 2204A/5A PicoScope 2000 Series (A API) Programmer's Guide: PicoScope 2206A/7A/8A These documents are available from http://www.picotech.com. -
Page 6: Introduction
Possibility of electric shock. Caution. Static awareness. Static discharge can damage parts. IEC 61010 overvoltage category. Do not dispose of this product as unsorted municipal waste. ps2200a.en r1 Copyright © 2013 Pico Technology Limited. All rights reserved. -
Page 7: Maximum Input Ranges
Maximum input ranges Observe all terminal ratings and warnings marked on the product. WARNING PicoScope 2200A Series PC oscilloscopes are designed to measure signals within the range ±20 V. To prevent electric shock, do not measure voltages outside of this range. -
Page 8: Environment
Care of the product The product contains no user-serviceable parts. Repair, servicing and calibration require specialized test equipment and must only be performed by Pico Technology or an approved service provider. There may be a charge for these services unless covered by the Pico five year warranty. -
Page 9: Ce Notice
Access. The licensee agrees to allow access to this software only to persons who have been informed of and agree to abide by these conditions. Usage. The software in this release is for use only with Pico Technology products or with data collected using Pico products. -
Page 10: Warranty
Goods will be free from defects in material and workmanship. Pico Technology shall not be liable for a breach of the warranty if the defect has been caused by fair wear and tear, willful damage, negligence, abnormal working conditions... -
Page 11: Product Information
Buffer size (shared 16 k 32 k 40 k 48 k between enabled channels) (including 142 x 92 x 19 mm Dimensions (5.6 x 3.6 x 0.8 in.) connectors) Copyright © 2013 Pico Technology Limited. All rights reserved. ps2200a.en r1... -
Page 12: Picoscope 2200A Series Pack Contents And Accessories
Probe pouch System requirements To ensure that your PicoScope 2200A Series oscilloscope operates correctly, you must have a computer with at least the minimum system requirements to run one of the supported operating systems, as shown in the following table. The performance of the software will increase with more powerful PCs, including those with multi-core processors. -
Page 13: Installation Instructions
The process is automatic. When you move the device from one port to another, Windows displays an "Installing device driver software" message and then a "PicoScope 2000 series PC Oscilloscope" message. The PC Oscilloscope is then ready for use. Copyright © 2013 Pico Technology Limited. All rights reserved. ps2200a.en r1... -
Page 14: Connections
D. LED: shows when the oscilloscope is sampling data USB port 3.5.2 Signal inputs The PicoScope 2200A Series oscilloscopes have BNC oscilloscope connectors. The inputs have an impedance of 1 M , so they are compatible with all standard scope probes including x10 attenuated types. 3.5.3... -
Page 15: Awg Connector
PicoScope 2000 Series Programmer's Guide for PicoScope 2204A/5A, or PicoScope 2000 Series (A API) Programmer's Guide for PicoScope 2206A/7A/8A AWG output specifications Refer to the PicoScope 2200A Series datasheet available on our website. 3.5.5 USB port Connect the oscilloscope's USB port to your PC's USB 2.0 or USB 3.0 port using the USB cable supplied. -
Page 16: Glossary
PicoScope software. PicoScope software—A software program that accompanies all Pico PC Oscilloscopes. It turns your PC into an oscilloscope, spectrum analyser, and meter display. ps2200a.en r1 Copyright © 2013 Pico Technology Limited. All rights reserved. - Page 17 -100 mV and +100 mV. Input voltages outside this range will not be measured correctly, but will not damage the instrument as long as they remain within the protection limits stated in the specifications. Copyright © 2013 Pico Technology Limited. All rights reserved. ps2200a.en r1...
-
Page 18: Appendix A: Declaration Of Conformity
Appendix A: Declaration of Conformity Appendix A: Declaration of Conformity ps2200a.en r1 Copyright © 2013 Pico Technology Limited. All rights reserved. -
Page 19: Index
System requirements FCC notice Technical support Test equipment GEN connector Trademarks Grounding Upgrades Input range, maximum USB port changing Installation connecting requirements Low Voltage Directive (LVD) Vertical resolution Mains voltages Copyright © 2013 Pico Technology Limited. All rights reserved. ps2200a.en r1... - Page 20 Index Warranty Windows, Microsoft ps2200a.en r1 Copyright © 2013 Pico Technology Limited. All rights reserved.
- Page 21 PicoScope 2200A Series User's Guide Copyright © 2013 Pico Technology Limited. All rights reserved. ps2200a.en r1...
- Page 22 Pico Technology James House Colmworth Business Park ST. NEOTS Cambridgeshire PE19 8YP United Kingdom Tel: +44 (0) 1480 396 395 Fax: +44 (0) 1480 396 296 www.picotech.com ps2200a.en r1 11.11.13 Copyright © 2013 Pico Technology Limited. All rights reserved.
Need help?
Do you have a question about the PicoScope 2200A Series and is the answer not in the manual?
Questions and answers