Advertisement
Quick Links
MAS90: 5043-43256
SUMMIT ROOMSAVER HARDWARE
QTY:
8
100MM DECORATIVE HEAD LAG BOLTS
1
4MM ALLEN WRENCH
10
6 X 1 1/4" PHIL FLAT PARTICLE BOARD SCREW
1
4MM POWER DRILL DRIVER
2
4" X 2" MENDING PLATES
2
710124 F 2" MENDING PLATES
16
#8 X 1" PHIL PAN SMS ZINC SCREWS
4
2 1/4" L BRACKET
16
#8 X 3/4" PHIL PAN SMS ZINC SCREWS
DESCRIPTION:
ASSEMBLY: 1 PERSON AND 45 MINUTES
TOOLS:
1)
2)
3)
*We recommend using a power driver with the drill bits if
available*
BE SURE THE LAG BOLTS ARE STARTED
INTO THE HOLES ON THE FRAME RAILS
DURING ASSEMBLY. DO NOT FULLY
TIGHTEN UNTIL ASSEMBLY IS LOOSELY
COMPLETE.
7030-00452 KIT
4mm Allen Wrench (INCLUDED)
4mm Allen Drill Bit
(Be sure to FULLY SEAT the bit into
bolt head before turning)
Phillips Screwdriver
Advertisement
Related Manuals for Living Spaces MAS90
Summary of Contents for Living Spaces MAS90
- Page 1 7030-00452 KIT MAS90: 5043-43256 SUMMIT ROOMSAVER HARDWARE QTY: DESCRIPTION: 100MM DECORATIVE HEAD LAG BOLTS 4MM ALLEN WRENCH 6 X 1 1/4" PHIL FLAT PARTICLE BOARD SCREW 4MM POWER DRILL DRIVER 4" X 2" MENDING PLATES 710124 F 2" MENDING PLATES #8 X 1"...
- Page 2 7030-00452 4660/4663/4664 SUMMIT FULL ROOMSAVER 4660/4661/4662 SUMMIT TWIN ROOMSAVER TWIN FULL PARTS LIST: 8 - 100mm Decorative Head Lag Bolts 1 - Roomsaver Headboard (same Headboard for Twin and Full bed) 2 - End Assembly w/ doors. Doors open outward to determine Right side or Left side. 2 - 3 1/4"...
- Page 3 7030-00452 SUMMIT ROOMSAVER HEADBOARD BRACKET PLACEMENT Attach one ½” x 2” straight bracket at each end of the headboard spanning the joint between the top rail of the ends (D) and the bottom edge of the headboard uprights. Attach on 2x4’ bracket inside each end centered on the headboard ends Attach 2 ¼”...