Configure As A Wired Client - Aluratek AIRMM01F Instructional Manual

Chapter 3: Configuration
3.2 Configure as a Wired Client
If there is no 802.11b/g wireless network, AIRMM01F can also connect to the
wired network through an Ethernet cable.
For this case, prior to power on the device, you have to plug in the Ethernet
cable into the LAN (RJ45) connector on the back of the unit. After you power
on the device, it will automatically go into the wired client mode when it de-
tects a link status through the Ethernet connection.
First time using device with an Ethernet cable plugged in:
Instructions
1. POWER ON
2.
3.
Screenshot Go to next
screen
Notes
Device is running
as a Wireless
Client.
The device is in
wired client mode
now. It already
connected to your
network.
15