Advertisement
Drill fixing holes
STEP
5
Using the 3.6 mm (9/64 in.) twist drill,
drill out the fixing holes.
If using a hole saw, proceed to step 6(A).
If using the hole-punch, proceed to step 6(B).
Enlarging the center hole (hole saw)
STEP
6a
Using the 6 mm (1/4 in.) hole as a guide hole,
enlarge the center hole using the selected hole saw.
De-burr all of the holes and treat as required.
Proceed to step 7.
Enlarging the center hole (hole punch)
STEP
6b
Refer to the hydraulic punch manual and follow all
safety procedures.
Proceed to step 7.
89116261
© 2014 Pentair Equipment Protection
STEP 5
STEP 6a
STEP 6b
PH 763 422 2211
pentairprotect.com
- 3 -
Advertisement
