Table of Contents
Advertisement
BIG ASTOR S.r.l.
______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
EXTRAORDINARY MAINTENANCE
No particular extraordinary maintenance is required.
In case a part of the machine needs to be replaced, you should contact the
manufacturer for a list of available spare parts.
SCRAPPING
In case of final decommissioning the machine must be completely deactivated and
entrusted to a company authorized to transport and scrap metal.
IMPORTANT:
It needs to be reminded that the identification plate of the machine as well as any documents
related to it should be destroyed.
SAFETY AND FIRE RESISTANCE
SAFETY AND REACTION TO FIRE DEVICES
The equipment includes the following constitutional elements:
- A cover of polycarbonate certified to resist to an impact with a weight up to 50
kg falling from a height of 2.4 m;
- A machine tested by the manufacturer to resist to an impact with a weight up
to 5 kg falling from a height of 25 m;
- Supports which can be opened and closed due to a spring lock system;
- Telescopic supports which can be opened and closed due to a rack lock system
Due to its particular use the machine does not have any moving elements during its
normal functioning.
- The structure of polycarbonate has been registered as reaction to fire class "1"
by means of tests according to Norm UNI 9177.
In particular, the supplier of the alveolar polycarbonate cover and of the
plastic components declare in their technical sheets:
Alveolar polycarbonate cover 20 mm reaction to fire: Class B
-
Smoke development of the alveolar polycarbonate 20 mm: Class s1/s2
Dripping of the burning parts of the alveolar polycarbonate 20 mm: Class d0
Melting point of the plastic parts in PA6-FV30 e PA6-GF30: 220 °C
-
Use and maintenance manual
FACSIMILE
page 14 of 16
Advertisement
Table of Contents
