Joining Of Several Units - Facsimile Genius Use And Maintenance Manual

BIG ASTOR S.r.l.
FACSIMILE
______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
FUNCTIONING

JOINING OF SEVERAL UNITS

It is possible to use several units of the equipment joining them one another with the help of
lateral sliding fixing fins on all the four sides of each machine. It is only possible to join the
units where the lateral fins are positioned in the opposite direction (see the picture). It is
better the lateral fixing fins are not hit, as if bent it may not be possible to join them to other
units. It is recommended to the user to handle the tunnel and its components (accessories
included) with protective gloves, especially the corners of the lateral fins as they could be
sharp, even after factory bevel.
Scheme of joining of several machines
Thanks to a special connection, it is possible to join several units together, thus,
creating a tunnel of various length and form to satisfy any needs.
Example of joining of two protection units
Use and maintenance manual page 11 of 16