Set-Up And Use; Before First Use - Telefunken HCTB5 Manual

SET-UP AND USE

Before first use

Remove any sticker, protective foil or storage cover on and inside the oven
1. Assembling the charging base
2. Assembling the turbo brush into the main body
1) Insert the horizontal part of the charging base into the
main part of the charging base as shown in step 1.
2) Insert the vertical part base into the horizontal part of
the charging as shown in step 2.
Ensure that all parts are well assembled and locked into
each other.
3) The charging base must be fixed to the wall using two
screws (not provided). Screw the 2 screws with a 2.5cm
distance from each other then insert the charging base onto
them to secure.
 Put the turbo brush on the ground.
 Hold the turbo brush with one hand.
 Hold the main body with the other hand.
 Insert the concave part of the main body into the
convex part of the turbo brush.
 The 2 pins shall insert themselves into the 2 holes of
the main body.
 Push downwards the main body until you hear a
click.
2
ENGLISH