Watch Operation & Care; Battery Information & Warnings - Surefire LUMINOX 2211 User Manual

performance of your 2211 Luminox.
3. When fuel gauge LED turns green, the light is charged to more than 90% of battery capacity.
NOTE: Charging a fully depleted battery can take up to three hours. The light may be left plugged
into the charger without damaging the battery.
Do not attempt to remove or replace the 2211 Luminox battery. Doing so will void the warranty. If
battery needs repair or replacement, contact SureFire at 714-545-9444
WATCH OPERATION & CARE
Read the enclosed Luminox manual for instructions on how to operate and care for the
self-illuminated watch of the 2211 Luminox.
The watch is powered by its own battery and can be replaced by a watchmaker following these steps:
1. Remove two Allen screws on top of 2211 Luminox.
2. Back out two small screws adjacent to crown and remove watch from WristLight body.
3. Carefully remove back plate of watch.
4. Replace spent battery with new one.
5. Re-install back plate to watch.
6. Re-secure watch to body by reversing steps 1 and 2.
BATTERY INFORMATION & WARNINGS
Before replacing batteries, read the enclosed BATTERY INFORMATION/WARNING insert in your
original packaging. For additional battery safety, handling, and product information, visit
www.surefire.com/batteries.
6