Troubleshooting - WilTec 62047 Operation Manual

Re-installing the filter: Insert the bottom part of the filter frame into the slot and the gently push

the filter in place.

Troubleshooting

Before calling a technician or sending your machine back for repair, please check this troubleshooting
list first. Contact the manufacturer or an authorized service partner in case of questions.
Problem
The machine does not work
Unable to drain
Abnormal sound while wash-
ing
Reduced water in wash tub
There is abnormal sound and
violent vibration while spinning
Caution:
Please turn off the power or disconnect the power plug from the mains
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Possible Cause/Solution
Is the power cut?

Is the power supply cord connected to a power outlet?

Is the pulsator tangled with something?

Has the drain hose been lowered?

Is the drain hose frozen?

Is the drain hose blocked?

Are there any clothes fallen outside of the spin tub?

Are there any loose particles in the wash tub?

Is the bellows of the overflow filter being miss-installed?

Is the machine placed on a flat and solid ground?

Is the spinner cap placed into the spin tub?

Are there any clothes fallen outside of the spin tub?

Is there too much laundry in the spin tub?

Do not attempt to repair the machine by yourself.
after having finished washing or spinning.
Item 62047 Page 7
03 2021-1