User Guide - INFOSEC UPS SYSTEM S5 LAN User Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 5
This surge protector is designed for a multimedia computer environment.
Its 5 French outlets will power and protect your computer, its screen, speaker kit, printer and internet modem
for example.
For maximum protection of hardware connected to the internet, just use the dual RJ 45 connector: in the
event of lightning or overvoltage on the network or telephone line, the S5 LAN surge suppressor function
starts and protects connected hardware.
Please read all the instructions before setting up the S5 LAN.
It must be installed indoors in a safe location where the temperature and humidity do not exceed the limits
stipulated in the specifications section.
In addition to this type 3 surge suppressor, the NFC 15-100 standard in France requires the installation of a
type 2 (or 1) modular surge protector at the origin of your electrical system in the departments where the
lightning intensity is greater than 25 (number of thunderstorm days per year).
Please contact the hotline for details.
Connect the S5 LAN into a grounded 2-pin wall outlet (2P + E - 10 A).
Turn the master power switch to the "ON" position.
Plug your equipment to be protect into the five outlets of the S5 LAN.
The S5 LAN, with its two RJ 11/45, is equipped to protect the phone/fax/modem line. Plug the line
input into one socket and use another cable for the other socket connection to the
telephone/fax/modem.
If there is a problem, do not disassemble the S5 LAN, there are no reparable parts inside. Please
On/off switch
1
The S5 LAN main switch turns the power to 5 outlets on and off.
Protection indicator
2
Green "Protected" light on: the equipment is protected against overvoltage and lightning.
Green "Protected" light off: no protection.
Grounding indicator
Red "Grounded" light on: the outlet is grounded.
3
Red "Grounded" off: the outlet is not grounded.
Overload protection
When the consumption of connected equipment exceeds the allowable value, the circuit breaker opens to
4
protect the S5 LAN.
To reactivate, reduce the connected power and engage the circuit breaker.
Protected outlets
5
Outlets are used to connect devices such as television, speakers, burner, console, desk lamp, etc. They are
controlled by the on/off switch.
Protection of equipment connected to the Internet
6
The S5 LAN, with its two RJ 45 ports, protects hardware connected to the Internet against overvoltage (RJ11
removable adaptor).

User Guide

Safety instructions
contact the After-Sales Service (Hotline).
Operation and legends of the scheme
INFOSEC UPS SYSTEM 4, rue de la Rigotière 44700 ORVAULT - France - www.infosec.fr
Hot Line : tel : + 33 (0)2 40 76 15 82 - fax : + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 06 12 AA 77 205 30
Installation
5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S5 LAN and is the answer not in the manual?

This manual is also suitable for:

61271n1

Table of Contents