Connections (Where Supplied); Front Terminal Connections; Remote Venting System (Rvs) - Fiamm FET FG Series Installation And Operating Instructions Manual

FIAMM Energy Technology S.p.A

1.7. Connections (where supplied)

Suitable solid connectors
plated copper; suitable insulated plastic
are made of ABS -V0
From 5 to
10 mm.
TOP TERMINAL CONNECTION is mainly used for
FET battery range SLA – FLB as well

1.8. Front Terminal Connections

Suitable solid connectors made of copper thin or lead
plated and covers made of ABS are provided to make a
proper installation between blocs. Designed for FET
front terminal range FIT using a special "L " clamp
1
SOLID CONNECTOR
2
COVER
"L" CLAMP
3
This document and the confidential information it contains shall be distributed, routed or made available solely with written permission of FIAMM Energy Technology.
FIAMM Energy Technology S.p.A. reserves the right to change or revise without notice any information or detail given in this publication.
Installation & Operating Instruction -Technical Manual
1
are made of tin or lead
covers
2
1
2
2
1
1
3

1.9. Remote Venting System (RVS)

Most of FET AGM batteries are designed with an
optional central degassing system on the top lid
covering sheet. So if batteries need to be installed in a
totally sealed cabinet, it is advisable to use the remote
venting system available from the manufacturer to
conduct any gas from the batteries to the outside of
the cabinet itself.
4
5
2
1
Edition 03/2018 Rev.7
2
RVS – front side used for FIT
range
RVS – top side
used for SLA / FLB / FIT range
4
5
Pag 3 / 12