Advertisement
Power supply
- Supply with class 2 device
- 24 VDC ±25% 2A max., powers the entire GILOGIK II system
- polarity inversion protection
Ethernet
- standard RJ45 connection
- 16 position rotary switch for node identification on network configuration
- Standard IEEE802.3
Diagnostics
- power supply on (yellow POWER led)
- module in run / configuration (green RUN led)
- module or system in alarm / not configurated (red FAIL led)
Yellow LED POWER
Green LED RUN
Red LED FAIL
Green LED DATA
Yellow LED LINK
(*)
4
3 • TECHNICAL DATA
I
4 • CONNECTIONS
Rotary switch to select the node
0
= no active
1..F = nodo 1..F (1..15)
Ethernet (*)
RJ45
Supply (**)
The module installs on R-BUS(x) in the first slot on the left if there is no R-SW5 module;
in the second slot if there is an R-SW5 module.
GEFRAN spa via Sebina, 74 - 25050 Provaglio d'Iseo (BS)
Tel. 03098881 - fax 0309839063 - Internet: http://www.gefran.com
- yellow LINK led: network connected
- green DATA led: data transfer
M
echanical data
Dimensions: 92x90x25,4mm
Weigth: 150g.
Fixing: snaps onto R-BUS(x)
Protection level: IP20
a
c
Mbient
onditions
Working Temperature: 0...50°C
Storage Temperature: -20...70°C
Humidity: max. 90% Rh not condensing
For UL: Maximum surrounding air temperature 50°C
(*) Use standard category 6 cable according to TIA/EIA-568A
(**) Use unipolar cable with 1-1.5mm cross section Do not attach a lug
24Vdc
± 25%
Max 2A
(*) with the 18 position bus, positions 1, 2 are reserved
to the R-ETH100 and R-SW5 modules.
80127C_MhW_r-eth100_08-2011_eng
Advertisement
