Displayport Mst Daisy Chain Connection - ViewSonic VS18552 User Manual

DisplayPort MST Daisy Chain Connection

With DisplayPort Multi-Stream Transport (MST) support, you can daisy chain
connect up to four (4) monitors.
1. Connect one end of a DisplayPort cable to the DisplayPort Out port of your
computer. Then connect the other end of the cable to the DisplayPort In port of
the monitor.
2. Use another DisplayPort cable to connect to the DisplayPort Out port of the first
monitor. Then connect the other end of the cable to the DisplayPort In port of
the second monitor.
3. Repeat Step 2 as needed with up to four (4) monitors.
NOTE: Your graphics card compatibility and monitor resolution will determine
the number of monitors.
1
Out
NOTE:
• DisplayPort 1.2 MST must be turned on in the Setup Menu in the OSD
Menu to enable daisy chaining.
• If the input source changes to HDMI, DisplayPort 1.2 MST will turn off
automatically.
HDMI 2 HDMI 1
2
3
In
Out
Out
3 4
In
In Out
14
IN OUT
5
6
Out
Out
In
In
In