Crux BTS-MZ1 Quick Start Quide

INTERFACING SOLUTIONS

PRODUCT FEATURES:

- Adds Bluetooth Music streaming to the Mazda radio with controls from the steering wheel control or radio buttons.
- USB music playback with track up, track down and folder controls from the radio or steering wheel controls.
- Adds 3.5mm auxiliary audio input.
- Hear turn-by-turn Navigation App Voice Prompts on your car audio system while in Bluetooth mode.
- USB port on the module can also be used to charge your phone.
- Magnetic phone mount included.
Notes:
1. Radio must have a 16-pin CD changer port.
2. Not compatible with vehicles with DVD Navigation or factory rear view camera.

INSTALLATION INSTRUCTIONS:

1. Carefully remove the radio to gain access to the radio connectors.
2. Locate the 16-pin CD changer port. If there is a connector plugged into this cavity, you need to unplug it.
3. Plug the WHITE 16-pin connector of the BTS-MZ1 to the CD changer port of the radio.
4. If the line-in feature will be used, plug a 3.5mm to 3.5mm cable (sold separately) to the BTS-MZ1 module and
run towards the desired location.
5. If a USB flash drive will be used, plug in a male to female USB cable (not included) to the BTS-MZ1 module and
run to the desired location.
6. You can also mount the BTS-MZ1 to an accessible location such as the center console or glove box, to use the
3.5mm line-in and USB features.
7. Test the system for functionality before putting back the radio.
+ +
R
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
Bluetooth Audio Streaming, USB Music Player and Auxiliary
Audio Input for Select Mazda Vehicles
1 of 2
BTS-MZ1
rev.082020