Advertisement
Quick Installation
Before sticking the power bank to your smartphone, please take a moment to correctly position it for optimal wireless
charging. [1]
Please follow the steps below:
Do not yet remove the protective plastic from the adhesive strips. [2]
Press the power button to turn on the power bank. [3]
Align the power bank with the wireless charging receiving coil located on the back of your smartphone. If desired, do
this with a Qi-compatible phone case already attached to your phone. You've found the correct alignment when your
phone begins charging. Memorize the approximate correct position. [4]
Now peel off the protective plastic from the adhesive strips and firmly press the power bank to that determined position.
[5]
There are four additional adhesive strips on the pack in case you need to reposition the power bank. [6] If you need
further replacement strips, please contact our customer support.
The power bank is designed for iPhone and Samsung. [7]
For other smartphone models, please be advised that the power bank may cover the camera or the fingerprint sensor
on the back of the smartphone. CAUTION [8]
[1]
[3]
[5]
[6]
on/off
X4
[2]
[4]
[7]
Advertisement
