Advertisement
Power Ring
Package content
Power Ring | USB-C to USB-A cable 60 cm (2 ft) | Replacement adhesive strips x4 | User manual.
Product overview
Thank you for choosing Einova Power Ring. The Power Ring is a wireless power bank, allowing you to charge your
smartphone without cables while on the go. Works with all Qi-enabled phones. Please read the user manual before
using the product.
How to use
1. Wireless power bank
Charge your smartphone without cables while on the go and enjoy more than three hours of extended battery life.
2. Pass-through charging
Recharge your power bank with the included USB-C cable. The pass-through charging feature allows you to continue
charging your phone wirelessly.
3. Quick setup
Easily stick the power bank to the phone with the adhesive strips. Four additional adhesive strips are included in the
package.
4. Removing the Power Ring
Remove your Power Ring from your phone by carefully unsticking it from the smartphone surface. Use a flat, stiff object
like a credit card if needed. Clean the surface to remove any remaining glue.
Recommended accessory: Qi-compatible smartphone case
For maximum flexibility, we recommend attaching the Power Ring to a Qi-compatible removable smartphone case
rather than directly to the back of your device. This allows you to simply exchange your device's everyday case for the
case with the Wireless Power Ring already attached, with no need to unstick and clean up after adhesive residue.
Instructions
Before installing the product watch the installation video at: www.einova.com/store/product/wireless-power-popper-ring/
1. Without removing the protective plastic from the adhesive strips, turn on the Power Ring by pressing the power
button. Align the Power Ring with the wireless charging receiving coil located on the back of your smartphone. If
desired, do this with the recommended Qi-compatible case already attached to your phone. Correct alignment is
reached when your phone begins charging.
2. Peel off the protective plastic from the adhesive strips and firmly press the Wireless Power Ring to the determined
position on your smartphone or smartphone case.
3. Press the power button to turn the Power Ring on and off. Your phone will now automatically begin wireless charging
whenever the Power Ring is turned on.
Recharge your Power Ring
To recharge your Power Ring, connect the included USB-C cable to a power adapter and then to the power bank. Thanks
to the pass-through charging feature, you can still continue charging your phone while recharging the power bank.
Approximate time for a full recharge: using a standard USB-A power adapter (5V 1A): 30 minutes.
Specifications
POWER RING Size: 10 x 6,2 x 1,1 cm (3.97 x 2.44 x 0.43 in) | USB-C input: DC 5V 1A | Output: wireless 5W | Battery capacity:
1,500 mAh | Color: green, gold, pink, purble, brown, blue, black, metal, azure, bronze, red | Finish: hard plastic, waterproof
canvas, soft touch, chrome-plated frame. REPLACEMENT ADHESIVE STRIPS X4. CABLE USB-C to USB-A 60 cm (2 ft).
LED indicators
Short press the power button to turn the Power Ring on and off.
When the Power Ring is turned on, the blue LEDs will show the remaining power.
- One blue LED: the battery is 30% charged
- Two blue LEDs: the battery is 60% charged.
- Three blue LEDs: the battery is fully charged.
The green LED indicates that the Power Ring is currently charging a smartphone.
Troubleshooting
If the product is not working properly please
first check the troubleshooting guide below. If your situation differs from normal conditions, please try to solve the issue
or call customer service at 44 (808) 178 7288 Mon-Fri 9am-5pm (GMT).
For full troubleshooting visit our website: www.einova.com/store/support/troubleshooting
Advertisement
