Related Manuals for DIMAX GROUP Könner & Söhnen KS ATS 3/18 HD
Summary of Contents for DIMAX GROUP Könner & Söhnen KS ATS 3/18 HD
- Page 1 Manual Please, read this manual carefully before use! AUTOMATIC TRANSFER SWITCH (ATS) KS ATS 3/18 HD KS ATS 1/40 HD KS ATS 4/63 HD...
- Page 2 PREFACE Thank you for your purchase of ATS from TM Könner & Söhnen. This manual contains safety instructions, a description of the use and commissioning of the ATS and procedures for its maintenance. The manufacturer reserves the right to make changes in the product design, configuration and construction. The images and drawings in this manual are for reference only and may differ from the actual components and inscriptions on the products.
-
Page 3: Specifications
SPECIFICATIONS Model KS ATS 3/18 HD KS ATS 1/40 HD Battery voltage DC8.0 -18 V Power consumption 10 W Operating voltage / Maximum current 400V/18A 230V/40A Working environment -20-50 С humidity: 20-90% Storage environment -30-70 С humidity: 20-90% IP protection class IP41 Insulation class AC1.5KV / 1min 1mA... -
Page 4: Operating Procedure
GENERAL VIEW OF THE ATS UNITS KS ATS 3/18 HD, KS ATS 1/40 HD, KS ATS 4/63 HD 1. Main power indicator Img. 1 2. Load connection indicator 3. Generator power indicator 4. ATS unit main switch 5. Control cable connector 6. - Page 5 CONTROLLER: INDICATORS AND CONTROL BUTTONS Starter indicator – signals the operation of the starter and flashes once per second in preparation for the startup. Engine preheat indicator – glows steadily when the engine is preheated. The generator must be equipped with an engine preheating system. Engine indicator –...
-
Page 6: Controller Settings
CONTROLLER SETTINGS With the engine off, press and hold down the button for 3 seconds to switch the controller to the setup mode. To select the setting, briefly press the button. The parameters are changed cyclically. PARAMETERS: PARAMETERS: Engine start delay time following deenergization of the main power supply (factory set to 12 seconds). -
Page 7: Wiring Diagrams
CONNECTION OF THE GENERATOR AND ATS TO THE BUILDING POWER SUPPLY NETWORK Img. 3 ELECTRICAL COUNTER ELECTRICAL GENERATOR SUPPLY NETWORK WITH ATSR ELECTRICITY CONSUMERS Opening of ATS unit and its connection to the mains must be carried out only by qualified specialist. The product is WARNING —... - Page 8 MODELS KS ATS 3/18 HD AND KS ATS 1/40 HD MODELS KS ATS 3/18 HD AND KS ATS 1/40 HD MODEL KS ATS 4/63 HD MODEL KS ATS 4/63 HD 230V / 400V Contact stripe Contact stripe motorized switch for connection for connection Img.
-
Page 9: Warranty Provisions
ELECTRIC SCHEMES KS ATS 3/18 HD – see picture 2 in the Appendix. KS ATS 1/40 HD – see picture 4 in the Appendix. KS ATS 4/63 HD – see picture 6 in the Appendix. WARRANTY PROVISIONS The international manufacturer warranty is 1 year. The warranty period starts from the date of purchase. In cases when warranty period is longer than 1 year according to local legislation please contact your local dealer. - Page 10 ANNEX KS ATS 3/18 HD CITY OUTPUT GENERATOR www.ks-power.de/en |...
- Page 11 KS ATS 1/40 HD CITY OUTPUT GENERATOR www.ks-power.de/en |...
-
Page 12: City Power
KS ATS 4/63 HD CITY POWER LOAD GENERATOR www.ks-power.de/en |... - Page 14 CONTACTS Deutschland: DIMAX International GmbH Deutschland, Hauptstr. 134, 51143 Köln, www.ks-power.de info@dimaxgroup.de Polska: DIMAX International Poland Sp.z o.o. Polen, Warczawska, 306B 05-082 Stare Babice, www.ks-power.pl info.pl@dimaxgroup.de Україна: ТОВ «Техно Трейд КС», вул. Електротехнічна 47, 02222, м. Київ, Україна www.ks-power.com.ua sales@ks-power.com.ua...
Need help?
Do you have a question about the Könner & Söhnen KS ATS 3/18 HD and is the answer not in the manual?
Questions and answers