Solar Bollard Lighting SBL Installation Manual

Congratulations on purchasing your
Solar Light Bollard
SBL
SBL2
© 2003 - 2019 Key Wholesalers Pty Ltd t/a Solar Bollard Lighting- All rights reserved
SOLAR BOLLARD INSTALLATION GUIDE

IMPORTANT BEFORE YOU INSTALL

The highest powered Solar Bollard Light for
your location shown in all our location specific
sales brochures and technical data sheets is
specified to be installed in direct undisrupted
sunlight
from dawn until dusk based on your
locations winter month's lowest sun trajectory.
Note: Battery is pre-connected for immediate
activation after pole/mounting installation.
Installation Site: If shading from trees or other
structures are found at the site of installation
not discussed prior to delivery of your order
Solar Light Bollard/s, please immediately
contact your supplier prior to commencing
the installation as a lower power model
maybe required to ensure dusk until dawn
operation at full power throughout the year and
as specified in our Warranty T&C's.
Ensure your Solar Light Bollard power model
ordered allows for possible future shading
issues such trees growing and/or new buildings
being possibly erected near the installation site.
AN INCORRECT POWER MODEL
SELECTION IS NOT WARRANTABLE
Next are the time of day examples of amounts
of shading on the Solar Light Bollard to allow
for lower power model choice compensations.
FULL WINTER SUN
(Lowest Sun Trajectory)

SHADING EXAMPLES

Partly in Shade
or Snow Covered Region in Full WINTER Sun
Drop down at least one (1-2) power levels
Mostly in Shade – SBL2 ONLY
Drop down to 40mA
Your supplier will have a relevant installation
guide specific for your actual location.
Contact them for a copy to ensure you have
chosen the correct power model for the
installation location if you have any concerns.