Maintenance; Clean Lint Filter; Clean Machine; Remaining Water Is Frozen - Whirlpool LWT-800 Instruction Manual

MAINTENANCE

After washing, clean lint and foreign objects from the lint filter and frame after
each use .
Before cleaning, pull the plug out of the socket.

Clean lint filter

During washing,the lint-filter must
be used.
Be sure to clean it after each use.
1.Toremove filter,put your hand in the
groove,press and pull down the filter.
2.Clean the filter in water.
3.After cleaning,insert the filter into the
frame,and press in the upper part.
Clean the washing machine
Clean machine with soft cloth.
Clean with neutral detergent.
Never wash it directly with water.
After washing, remove the water inlet hose.
Pull out the plug and hang up the wire.
Do not keep water in wash tub for too long .
After washing, drain immediately.
Clean the outside and inside of the washing
machine with soft cloth. Leave upper cover
open and close it after 1 hour .
Hang up the drain hose well.
When the remaining water is frozen
To prevent freezing,after each wash,drain water
completely
After complete draining,set the program/drain
selector to the strong or standard position.
If it is on the drain position, ice is hard to melt,
when it is frozen.
Pour water below 50 degree into wash tub to
soak.Then turn the pulsator with your hands
gently until it drains.After that,it is ready for use.
8
C
2-3 L