Whirlpool LWT-800 Instruction Manual page 8

WASHING SEQUENCE
Rinsing
Rinse(filling water)
1.Put clothes in the wash tub and select the suitable water flow according to
the clothes.
2.Rinse
Adjust the wash timer to 5-7minutes to do rinsing.
Rinse with water
1.Put clothes in the washing tub and select the suitable water flow according
to the clothes.
2.Fill water to the specified level.
3.Rinse by adjusting the wash timer to 2-3 minutes .When the weight of
clothes is below 3kg, use standard water flow. If you use strong water flow,it
may make the water splash.
Spray Rinse
1.Put the clothes into spin tub.
2.Move the water inlet switch to spin side.
3.Select the spin time.
Notes:You may repeat the above 1~3 steps to do more than one spray rinse.
Spinning
1.Put the clothes in spin tub .
2.Press the safety cover properly and close
the spin cover
3.Spinning
Select the spin time according to the type of
clothes .
If there is abnormal sound produced,while
spinning,do switch off washing machine and
rearrange clothes.
While spinning,if spin cover is opened,
spinning will stop, Close it, it will resume
spinning.
To do spinning and draining or rinsing(filling water) together,please
first do spinning for about 1 minute,then do draining or rinsing,
otherwise the spinning will stop owing to too much water stored in the
spin tub.
(Repeat the midway spinning and rinse for 2-3 times.)
7
Selection of spin time
Clothes
Spin time(m)
Bedsheet, blanket About4~5
About2~4
Underwear(knitwear)
Sweater(fabric) About1~2
Thin clothes Within 1