Page 1
Rev.1.2 Spinner II - User Manual Night Shark Subsea Camera U S E R M A N U A L IMENCO AS Visiting Address: Stoltenberggata 1, 5527 Haugesund, Norway Office: +47 52 86 41 00 imenco@imenco.com Org No: 923 005 749 MVA Mail Address: PO.
Safety information ........................3 Warranty ............................3 General Description ......................4 Regarding these Instructions for Use ................. 4 The Night Shark Subsea Camera ................4 Main Features ........................ 4 Technical Specification ......................5 Power ..........................6 Installation Instructions ....................... 6 Unpacking and testing ....................
Night Shark - User Manual 2 Technical Specification Video format Composite SD video - Monochrome Resolution 570 TVL View port material BK7 Glass Dome Lens system Auto Iris View Angle Horizontal: 92° in water Diagonal: 105° in water Minimum illumination 0,0000025 lx.
The camera housing is not connected to Protective Earth. 3 Installation Instructions Make sure that Imenco’s Terms & Conditions are followed when using this product. 3.1 Unpacking and testing When having received the camera do a visual inspection for damage of the packet or any of the parts.
Night Shark - User Manual 3.2 Function test A preliminary function test should be performed prior to full scale installation. This is to familiarize the user with the control functions and to verify that the system is fully operational after shipment.
4 Operational Instructions 4.1 Hazards and protective measures The Night Shark camera does not generate or use dangerous high electrical voltages. The camera is filled with inert gas at atmospheric pressure. Follow the safety information at the beginning of this manual.
If the Night Shark camera seems to be not working properly, please try to speed up the service that Imenco can provide by describing the problem in specific terms from the person who have first handed observed the fault.