Know Your Breville Cordless Hand Blender; Operating Your Breville Cordless Hand Blender - Breville BCS600XL Manual

Know your Breville Cordless Hand Blender

Portable cordless operation
Safety system
ensures the Cordless Hand Blender will not operate unless the Power
button and Speed button are pressed simultaneously
Long lasting 12V battery
2 speed push button control
light press for low speed, firm press for high speed
34 floz (1 liter) capacity mixing jug with storage lid
ideal for blending, measuring and storing a variety
of foods. The jug lid also doubles as a non-slip
base, as it fits both the top and bottom of the jug.
Patented smoothie attachment
for whipping and aerating
Detachable shaft for easy cleaning
Stainless steel ice-crushing blades
Charge light
indicates when the Cordless
Hand Blender is charging
(red) or fully charged
(green)
360° charging base
with cord storage
Optional wall
mount included
Chopping bowl
for use as a mini chopper or food processor.
Item not shown.
6

Operating your Breville Cordless Hand Blender

Before first use
Remove any packaging material and promotional
labels. Remove the blending shaft from the blister
pack and wash the blending shaft in warm soapy
water. Rinse and dry thoroughly. Ensure no water
remains inside the blending shaft to avoid water
ingressing into the motor body when re-attached.
Disassemble mixing jug, storage lid and smoothie
attachment and wash in warm soapy water, rinse and
dry thoroughly. Ensure no water remains inside the
smoothie attachment to avoid water ingressing into
the motor body when re-attached.
Dishwashing is not recommended for any part of the
Breville Cordless Hand Blender.
Unlike stick blenders which are plugged into the
power outlet for operation, the Cordless Hand Blender
is safe for use in and around the sink and stove.
However, care should be taken not to immerse the
motor body in water or any other liquid. If using the
Cordless Hand Blender as a stick blender to blend hot
food in a saucepan, remove the saucepan from the
heat source and ensure the liquid is not boiling.
Allow hot food to cool slightly before blending. The
Cordless Hand Blender should be kept away from
any heat source.
The charging base is running at a safe, low
voltage, but it will be damaged if immersed in
water. The charging base should always be
positioned in a clean, dry place well away from
water or other liquids.
THE CORDLESS HAND BLENDER IS A VERSATILE APPLIANCE
THE CORDLESS HAND BLENDER MOTOR BODY CAN BE ATTACHED TO:
• THE STAINLESS STEEL BLENDING SHAFT – FOR USE AS A STICK BLENDER
• THE SMOOTHIE ATTACHMENT – FOR USE AS A STICK MIXER
• THE CHOPPER BOWL WITH CHOPPING BLADE AND LID - FOR USE AS A MINI CHOPPER
OR FOOD PROCESSOR.
Charging the battery before first use:
The battery in the motor body of the Cordless Hand
Blender is shipped either completely discharged of
power or with a small amount of charge. The battery
will require approximately 5 hours to fully recharge
from completely flat. The battery will require at least
2 hours recharging before it can be used effectively.
Subsequent recharging should take a shorter period
of time depending on the length of time the charging
base has been switched off.
The Cordless Hand Blender motor body has been
designed to be placed on the charging base and left
on charge at all times when not in use. The Cordless
Hand Blender motor body is fitted with a special
protective electronic circuit to prevent overcharging.
Unlike other rechargeable battery technologies, your
high quality Nickel Metal Hydride (Ni-MH) cells have a
high capacity and long life. They do not need to be
completely discharged before recharging.
All rechargeable batteries lose storage capacity
over time. If the Cordless Hand Blender battery
appears to deteriorate so that the operation time is
diminished, return the unit to a Breville Service
Center for battery replacement.
7