Quicly Installation Guide - Zanotti MSB3370Y2 Series Manual

Press SET key to confirm the set value or wait 15 seconds, Now the unit is operating and does not require any
further programming. The refrigerating cycle is fully automatic according to the factory-set parameters, which can
be modified by authorised personnel only.
ATTEN TI ON
24 hours after starting check evaporator state. I f ice has form ed, defrost frequency should
be increased. I n low tem perature units the evaporator condition should be check ed every
w eek during the first m onth of operation.
9.2 Quicly guide to installation
1) Install the air flow conveyor
2)To install, unscrew the nuts from the holes corresponding to the ones on the conveyor and screw back (see
following pictures)
34