Trouble Shooting - ILD 7 Manual

Trouble shooting

Problem
Problem
Smoke escapes to the room
Wood burning too quickly
Soot build-up on glass
Excessive soot build-up in
chimney
The surface of the stove is
turning grey
Poor heating performance of
stove
Odour or noise from stove
Cause
Fuel too wet.
Closed air controls.
Chimney draft insufficient,
dimensions, height diameter
or blockages
Vacuum in room
The air valves are set
incorrectly
The baffle plate are
incorrectly mounted or
missing
Inproper firewood (waste
wood, pallets etc.)
Chimney too large
Incorrect secondary airflow
setting
Excessive primary air
Fuel too wet.
Wood pieces too large on
lighting
Inproper firewood (waste
wood, pallets etc.)
Chimney draft insufficient,
dimensions, height diameter
or blockages
Vacuum in room
Fuel too wet.
The air valves are set
incorrectly
Overheating
Insufficient air flow
Incorrect fuel
Baffle plate position
Paint hardening
Material destressing
Manual section reference
See: Fuel
See: Primary Secoundary
control
See: The chimney effect and
cleaning
See: Closed combustion
See: Primary Secoundary
control
See: Installation
See: Fuel
See: The chimney effect and
cleaning
See: Fuel
See: Fuel
See: The chimney effect and
cleaning
See: Closed combustion
See: Fuel
See:
See: Enviroment and Primary
Secoundary control
See: Installation and
cleaning
See: Fuel
See: Installation
See: First use
See: First use
Manual section reference
25