Sterilization Function - TBI PRO Engineering TBI-2301 Instruction Manual

STERILIZATION FUNCTION

How to use:
1
Sterilize Formula Defrost
Food
Target temp Current temp
Set time Remaining time
Warm Delay
Function
milk start
Put the steaming rack into the warmer
4
Food Sterilize Formula Deftrost
Target temp Current temp
Set time Remaining time
Delay
Warm
Function
start
milk
Function
Press the 'Function' button twice. The 'Sterilize' indicator ashes
5 times, becomes a constant light, and then starts working.
6
For example, you want to increase Sterilization time to 30 min.
Press the 'Up' button till the screen will show 0.5 time units on the right side of the screen.
7
The working time starts after the water inside the warmer has reached 100°C (=212°F)'.
When the process is completed, the warmer automatically turns to the 'OFF' mode.
2
Sterilize Formula Defrost
Food
Current temp
Target temp
Set time Remaining time
Delay
Warm
Function start
milk
Put the bottlenecks down and
place them on the steaming rack
5
Default temperature is 100°C (=212°F) and cannot be changed.
Default working time is 0.2 time units (0.1 time unit = 6 minutes).
Adjustable time is between 0.2 to 0.5 time units.
Set time Remaining time
If needed, press 'Up' or 'Down' button to increase or decrease
the time while the 'Sterilize' button indicator light ashes.
3
Food Sterilize Formula Defrost
Target temp Current temp
Set time Remaining time
Delay
Warm
Function start
milk
Pour 80ml~ 100ml using the measuring cup (do not exceed 100ml.
The water level must not exceed the bottlenecks). Put the plug in.
10 0m l
80 m l