Alienware Area-51 m7700 User Manual page 73

7. Select the CD-ROM/DVD-ROM as the first device in the "Boot priority order" by pressing the <Shift>
and <+> keys to move the CD-ROM/DVD-ROM to the top of the order.
Main Advanced
Boot priority order:
1: IDE 0:
2: USB FDC
3: PCI SCSI: FT TX
4: IDE 1:
5:
6:
7:
8:
Excluded from boot order:
: USB HDD
: USB CDROM
F1 Help
Esc Exit
8. Insert the Microsoft Windows OS CD into the CD/DVD drive.
9. Make sure that the computer is connected to the AC power source, and press F10 to save the changes,
and exit the BIOS.
10. As the computer boots up you will see the screen below if no disk array is defined (press the Ctrl + F key
combination to enter the utility).
FastTrak 378(tm) BIOS Version 1.00.1.35
(C) 2002-2005 Promise Technology, Inc. All rights reserved.
No Array is defined ...........................
Press <Ctrl-F> to enter FastBuild (tm) Utility or
Press <ESC> to continue booting......
PhoenixBIOS Setup Utility
Security Exit
Boot
Item Specific Help
TOSHIBA DVD-ROM SD-C2612-
Keys used to view or
Y-E DATA USB-FDU-(USB)
configure devices:
Ary 1 Up and Down arrows
select a device.
<+> and <-> moves the
device up or down.
<f> and <r> specifies
the device fixed or
removable.
<x> exclude or include
the device to boot.
<Shift + 1> enables or
disables a device.
<1 - 4> Loads default
boot sequence.
Select Item -/+ Change Values F9
Select Menu Enter Select Sub-Menu F10
Figure 4 - 6
BIOS Boot Menu
Setup Defaults
Save and Exit
Figure 4 - 7
FastTrak BIOS
(No Array Defined)
RAID Mode Configuration 4 - 9
Drivers & Utilities
4