Denver TP04-180200E User Manual

What's in the Box?
Remote Control Screws

Connecting Your Sound Bar to Your TV or other sources:

Illustration of the Soundbar connectors for different connections:
1a. Is an HDMI input jack on your TV labeled "ARC"?
YES
HDMI HDMI OPTICAL
ARC
Use HDMI cable (V1.4 above)
to connect the sound bar to
the TV ARC socket.
NOTE: All cables what you needed should be plugged in before Power Supplies connected.
2. Connect the Power Supplies to Sound Bar
then power Insert Power Supplies to an AC outlet.
3. Turn on your sound bar.
Placing the Soundbar on a flat and solid surface. Hold the Power button
of the sound bar or Press RED key on the remote control to turn it on. Selecting Mode (input
source) as the following instruction to enjoy your powerful sound. When the Soundbar is switched
to standby, the red dot is turned on.
NOTE: 1. RESET: Hang up is solved by disconnecting and reconnected the power supplies.
2. It will be standby within 10 munities if no signal from Line In, BT, USB, ARC and Optical
inputs. It also will be standby if the low sound from Line In need to be heard within about
15cm distance.
Soundbar User Manual
Sound bar
Power Supplies
TV
HDMI
AUX
HEADPHONE
Use Optical cable to connect the
sound bar to the TV, DVD player
or set top box.
Aux Cable
EN
HDMI-ARC HDMI-ARC
OPTICAL
LINE IN
DC IN
1b. Don't have ARC or Optical output
NO
TV
AUX
HDMI OPTICAL
HEADPHONE
A red LED will pulse on
the front of the sound
bar indicating boot up.
User Manual
EN
OPTICAL
LINE IN
DC IN
available on your TV?
HDMI HDMI OPTICAL
ARC
Connecting the sound bar
identified LINE IN to the TV
with the provided AUX cable.
/MODE at the right side
TV
AUX
HEADPHONE