The Two System Leds - Alienware Area-51 m9750 User Manual

Alienware area-51 m9750: user guide
Table of Contents

Advertisement

Alienware Area-51 m9750 Technical Reference

The Two System LEDs

The two System LEDs are closely knitted together to reflect the system and battery
recharge statuses as below.
Off
Blue
Blue blinking once
per 1.5 seconds
Amber
Purple
Purple blinking
once per second
Amber blinking
once per 3 seconds
Amber blinking
once per second
Amber blinking five
times per second
Note: The two System LEDs are located at the rear bottom side of the LCD display screen.
For more details on Standby and Hibernate, please refer to Power Options in the
Control Panel of your Microsoft Windows operating system.
us-area51-9750-techref-05-2007.i8 8
• The system is off, or in hibernation mode, and
• The battery pack is fully charged, or battery pack
is not inserted.
• The system is in full operation mode, and
• The battery pack is fully charged, or battery pack
is not inserted.
• The system is in standby mode.
• The battery pack is being recharged (fast-charge
or pre-charge).
• The system is in full operation mode, and
• The battery pack fails to be recharged.
• The system is in standby mode, and
• The battery pack fails to be recharged.
• The battery pack is under discharge, and
• The battery power is more than 10% level.
• The system is in full operation mode, and
• The battery power is less than 10% level.
• The system is off, or in hibernation mode, and
• The battery power is less than 5% level.

5/8/2007 4:07:03 PM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents