Advertisement
3
rd
step: attaching the base frame to the worktop
1. Unfold the feet of the base frame so that the frame can stand up by itself. Then close and
lock the locking latches attached to the base frame. Make sure that the latches are secure.
2. Place the pre-assembled worktop with bars and movable feet on the floor so that the mov-
able feet are vertical or at a 90° angle.
3. Turn the pre-assembled base frame with crossbars and horizontal rods over so that the
frame feet point upwards. Then slide the frame onto the movable feet.
4. Secure the worktop to the base with U-shaped studs.
4
th
step: attaching the plastic feet to the base frame
1. Turn the assembled workbench over and place it on the
floor.
2. The longest edge of each plastic foot must be attached to
the outside corner.
5
th
step: workpieces/tools
Choose suitable holes on the worktop for attaching workpieces or tools.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 62453
Page 4
04
2021-1
Advertisement
