Axis M1045-LW User Manual page 12

AXIS M1045-LW Network Camera
Additional settings
Important
To ensure successful certificate validation, time synchronization should be performed on all clients and servers prior to
configuration.
Configure the wireless settings using WPA
1. Go to Settings > System > Wireless
2. In the list, select the wireless network.
3. Under WPA-Enterprise protocol, select EAP-PEAP/MSCHAPv2.
4. Enter the user Identity associated with your certificate.
5. Enter the Password for your user identity.
6. Select the PEAP Version (0 or 1) as used in the access point.
7. Select the PEAP Label that the access point uses when using PEAP version 1. Select 1 to use client EAP encryption; select
2 to use client PEAP encryption.
8. Select the EAPOL version (1 or 2) as used in the access point.
9. Select the CA certificate with which to validate the network/AP certificate.
10. Click Save.
Wireless certificates
Wireless network certificates are used to authenticate devices on a wireless network. Wireless networks using the
TM
WPA -/WPA2-Enterprise security method are protected by EAPOL (Extensible Authentication Protocol Over Lan), which is part of
the IEEE 802.1X standard. The client authenticates the server using digital certificates. The server authenticates the client using
digital certificates or a password depending on the selected WPA-Enterprise type.
TM
-/WPA2-Enterprise and EAP-PEAP/MSCHAPv2
12