Advertisement
Introduction
Thank you for purchasing this quality product. To minimize the risk of injury we urge that our cli-
ents take some basic safety precautions when using this device. Please read the operation in -
structions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Attention!
Before lifting an object, make sure you are fully aware on how the jack works. The inad -
equate use can cause serious injury. All other uses than the ones outlined here can damage the
device and can be dangerous.
Safety requirements
For safe use:
Only use the lawn mower jack for lifting.
Keep children away from the lawn mower jack.
No one, who is not accustomed to its use, may approach the lawn mower jack.
At no time leave the mower jack unattended.
Never overburden the mower jack. Overloading may damage the mower jack and/or cause a
defect, resulting in serious injury.
The mower lift is designed for a flat and hard ground. Using it on a soft surface can cause in-
stability, making the whole construct fall over.
Always determine the load on the lateral reinforcement, which is located on the opposite side
of the hand crank. The load should always be placed horizontally on the mower jack, prevent-
ing damage and the load from sliding or falling down.
Always visually check the jack before use. Do not place any objects on it before checking it.
When it comes to ride-on mowers, make sure that the driver has left the seat before it is lifted
up.
Before use
Assembly
Position the jack on a flat and stable surface.
Expand the steel rod and secure it with three screws.
Install the handle and tighten it by screwing it on.
Remove the locking peg.
Place the crankshaft upwards.
For a better use we recommend to grease the shaft before use. This should be repeated when
required to ensure the smooth functioning of the parts.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 50800, 51157
Seite 3
12
2020-1
Advertisement
