Check Connectivity; How To Enter Ssid And Passwords (Only For Wi-Fi Units); Final Verification - Access VITAL Installation And User Manual

HOW TO ENTER SSID AND PASSWORDS (only for Wi-Fi units)

Step 1: Using the arrow keys navigate to the "Network" option.
Step 2: Press "OK".
Step 3: Enter the SSID number and press "OK".
Step 4: Enter the password and press "OK".
Step 5: Next, using the arrow keys navigate to the "Security"
option.
Step 6: Select "WPA-2 Personal" and press "OK".
7

CHECK CONNECTIVITY

Step 1: Ensure the device is in range with a gateway.
Step 2: While in Menu, navigate to "Connectivity".
Step 3: Press "OK".
Step 4: Wait a few seconds. If connectivity is successful, it
should say "Connectivity OK".

FINAL VERIFICATION

Step 1: Log in to the unit with the keypad.
Step 2: While in Menu, navigate to "Connectivity".
Step 3: Press "OK".
Step 4: Wait a few seconds. If connectivity is successful, it
should say "Connectivity OK".
Step 5: Make sure to check for the network bars, if the bars
appear on the top of the screen then the device is
communicating to AssetPro 360.
VITAL Installation and User Guide