CONFIGURATION
Step 1: Install device as per the connection diagram (on
page 5).
Step 2: Ensure device is powered up by removing top
cover. Display should say "System OK".
ENTER HOUR METERS
Step 1: Using the arrow keys navigate to the "Hour
Meters" option.
Step 2: Press "OK" to edit the reading.
Step 3: Enter the new reading and press "OK".
Step 4: Edit the next input using arrow keys.
6
INPUT VERIFICATION
Step 1: Press the "MENU" button (gear icon).
Step 2: Enter password given and then press "OK"
(check mark icon).
Step 3: Use the arrow keys to navigate to the "Input
Status" option on the screen.
Step 4: Toggle input indicated on display. Based on the
state of the input, it should say either "ON" or "OFF".
Step 5: Check the next input using the arrow keys.
Note: If Inputs are sensed backwards, change its logic
from Active High to Active Low or vice versa in "Input
Settings".
VITAL Installation and User Guide