Miele F 2462 SF Operating And Installation Instructions page 69

Deactivating Miele@home
 In Settings mode , use the  and
 sensor controls to select
Miele@home and select OK to confirm
your selection.
 Use the  and  sensor controls to
select
Deactivate
confirm your selection.
Deactivation successful
display.
 Confirm the message with OK.
Your refrigeration appliance is now dis-
connected from your WLAN network.
The  symbol will go out on the dis-
play.
Activating Miele@home
If you have already activated
Miele@home and then disconnected
the connection, you will need to reac-
tivate the connection.
 In Settings mode , use the  and
 sensor controls to select
Miele@home and select OK to confirm
your selection.
 Use the  and  sensor controls to
select Activate
firm your selection.
Activation successful
display.
 Confirm the message with OK.
If the WLAN connection is active,  will
appear on the display.
and select OK to
will appear on the
and select OK to con-
will appear on the
Selecting additional settings
Checking the WLAN connection sta-
tus
 In Settings mode , use the  and
 sensor controls to select
Miele@home
your selection.
 Use the  and  sensor controls to
select Connection status
to confirm your selection.
Information about the WLAN connec-
tion status will then appear on the dis-
play:
-  connected: there is a strong con-
nection
-  connected: there is an average
connection
-  connected: there is a weak con-
nection
-  disconnected
Setting up Miele@home again
If you have changed your WiFi network,
you can set up Miele@home again for
your appliance.
 In Settings mode , use the  and
 sensor controls to select
Miele@home
your selection.
 Use the  and  sensor controls to
select Set up again
confirm your selection.
Reset configuration?
display.
 Use the  and  sensor controls to
select or
Yes
confirm your selection.
and select OK to confirm
and select OK
and select OK to confirm
and select OK to
will appear on the
and select OK to
No
69