Description And Operation; Automatic Day-Night Mirror Description And Operation; Outside Mirror Description And Operation - Chevrolet Silverado 4500HD Manual

Electrical body builder
Table of Contents

Advertisement

Description and Operation

Automatic Day-Night Mirror
Description and Operation
Inside Rearview Mirror with the
Automatic Day-Night Feature System
Operation
The inside rearview mirror uses 2 photocell sensors.
One sensor is the headlight sensor, located on the face
side of the mirror. The headlight sensor is used to
determine light conditions present at the mirror face.
The other sensor is the ambient light sensor, located on
the rear of the mirror or windshield side. The ambient
light sensor is used to determine the exterior light
conditions. With a low exterior light condition detected,
and a high light condition from behind the car, at the
headlight sensor, the inside rearview mirror will
automatically darken the face of the mirror.
In the daytime, the mirror is in a normal state because
of the high exterior light condition that is indicated by
the ambient light sensor. With the gear selector lever in
the REVERSE position and the engine running, backup
lamp supply voltage is supplied as an input to the inside
rearview mirror. The mirror monitors this input to
disable the automatic day-night feature. This allows the
driver to see objects in the mirror clearly when backing
up, even during the night.
Driver Outside Rearview Mirror with
Automatic Day-Night System Operation
(If Equipped)
The automatic day-night feature of the driver outside
rearview mirror is controlled by the inside rearview
mirror. The inside rearview mirror supplies control and
low reference to the driver outside rearview mirror. At
night, with the automatic day-night feature enabled, the
driver outside rearview mirror will automatically darken
with the inside rearview mirror to reduce glare from
headlamps behind the vehicle.
Outside Mirror Description and
Operation
Power Mirror System Components
The power mirror system consists of the following
components:
Mirror direction switch
up and down movements of the mirrors
Mirror select switch
select the mirror to be moved
Left outside mirror
and vertical mirror motors
Right outside mirror
horizontal and vertical mirror motors
Each of the outside power mirrors contains 2 motors.
The up-down motor operates the vertical directions and
the left-right motor operates the horizontal directions.
Each of the power mirror motors are internally circuit
breaker protected.
2021 - Silverado 4500HD, 5500HD, and 6500HD Electrical Body Builder Manual
Controls the left, right,
Allows the operator to
Contains both the horizontal
Contains both the
Mirrors
2-45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Silverado 5500hdSilverado 6500hd

Table of Contents