Meet PAT™ | Products and Things Pty Ltd | meetpat.com.au | Level 1, 419 Townsend Street, Albury, NSW, 2640, Australia Phone: (02) 60217813, +61260217813 Email: sales@meetpat.com.au Meet PAT™...
Page 3
Meet PAT provides artwork templates for your team to prepare or Graphics Panels alternatively we can help. Meet PAT™ | Products and Things Pty Ltd | meetpat.com.au | Level 1, 419 Townsend Street, Albury, NSW, 2640, Australia Phone: (02) 60217813, +61260217813 Email: sales@meetpat.com.au Page 3...
Page 5
Set up - SINGLE bottle Refill or DrinKING fountain Check tap for pressure Connect the tap adapter and clean water. and drinking hose. Option: If needed you can fill the base with Choose suitable location and position the base water for more stability. Lower the unit in to the base so it clips in place.
In addition, we ask that you exercise a degree of care when using any Meet Pat product and adhere to a common sense approach. - Do not set the units up near live exposed electrical connections or wiring.
Page 7
PACK DOWN Press the buttons to remove all the pressurized Turn off the water water in the units. Remove the tap connection Disconnect all the hoses from the units. Remove the unit from the base. Drain out all the water from the hoses and base plate (if filled).
What you should have 1. Carry Bag 5. Drain joiner hose 2. Water unit 6. Water joiner hose 3. Water hose 7. Tap adapter 4. Drain hose 8. Base plate Cleaning and maintenance It is very important to keep your MeetPAT Flow Meter units in the best possible condition.
Need help?
Do you have a question about the MP-PDF-02 and is the answer not in the manual?
Questions and answers