Entering Numerals - KEM FAU 50 Manual

Operation
2.3.1.

Entering Numerals

Each pressing will move the cursor in righthand direction. When the cursor has reached the last decimal
digit, the next pressing will move the cursor back to first digit.
To scan 0 to 9 for the present digit. "0" re-appears after "9". When the cursor marks the decimal point,
will not work.
To skip a parameter or enter your settings. The FAU automatically checks whether your settings are
within the allowable range for the parameter. If you enter a value which is not within the allowable range,
the FAU will not accept it and the last-entered setting appears. Only can you continue when your settings
are within the allowable range.
Ranges for the numerical parameters
Parameter
K-Factor
Density
Gate Time
Divider
Pulse Time
Analog Start Value
Analog Final Value
Flow-Limit Max.
Hysteresis Max.
Flow-Limit Min.
Hysteresis Min.
Cut off frequency
Linearisation Freq.
Linearisation Error
st
1 line:
nd
2 line:
Min. Value Max. Value
10.00 500000.00
700 2000
104 3224
1 90000
0.2 99.9
0.000 99999.999
0.001 99999.999
1 9999999
0.1 9.9
1 9999999
0.1 9.9
0.4 9.9
1 9999
0.1 12.7
Description of the present parameter
Current value, the cursor blinks on the first decimal digit
Remarks
pulses per litre
kg per m³
msec
decimal point and unit according to
settings
msec
unit according to settings
unit according to settings
decimal point and unit according to
settings
%
decimal point and unit according to
settings
%
creep quantity in Hz
Hz
% (±)
7
Version: FAU_M_EN_170308_E004