Table of Contents
Advertisement
10
3.1.2.
Unit for Flow Rates
To display measuring results in the corresponding unit, chose from pre-selections for volumetric and mass units.
In the measuring mode, the unit is only displayed with volume and mass flow.
Use
to go through the pre-selections.
Totals
kg
Grams
Litres
ccm
Imp
Gal.
lb
As soon as the desired unit appears, confirm with
3.1.3.
Decimal Point Position for the Flow Rate Display (DP Flow Display)
You should display your measuring results with a resolution in accordance with your application. Max. three
digits after the decimal point are possible.
NOTE:
Changing the decimal point position will also affect the limits. The FAU will remind you of checking the limits and
adapting them to the present decimal point position.
Example: three digits after the decimal point are required.
Enter with
, after that the next parameter appears.
Version: FAU_M_EN_170308_E004
pre-selection: litres per minute
Rate
l/min
kg/m
ccm/m
g/min
l/h
kg/h
ccm/s
g/s
Gal/m
lb/m
. After that the next parameter appears.
Programming
Advertisement
Table of Contents
