Alesis DM Pro Reference Manual page 60

Programming Effects
To reach the Effects Functions, press FX, and then with the cursor beneath the Effects
Function name (
the various Effects Functions:
REVERB(Plate2)
Outpt Level:99
To reach different Parameters within each Effects Function, move the cursor beneath
the Parameter name and then turn the Value encoder to scroll through the various
Parameters for the currently selected Effects Function:
REVERB(Plate2)
Type: Plate 2
Note that the display Page Number will appear at the upper right of the LCD
indicating the Parameter Page that you are currently on. The Page Number does not
indicate the Function Page. This is because the Effects Function deviates from the
normal DM Pro programming hierarchy in that it is the only DM Pro Function that
m o r e
contains
Function).
To adjust the Parameter Value for each Parameter, as in the rest of the DM Pro, move
the cursor beneath the Value and turn the Value encoder to make your selection:
REVERB(Plate2)
Type: Plate 2
Note again that a Value can be either a word or a number.
Below is a diagram which indicates the signal flow within the Effects configuration
used by the DM Pro. Use it as a visual aid in understanding the various Effects
Functions as they are discussed.
6 0
, , etc.), move the Value encoder to scroll through
REVERB OVERDRIVE
P1
P2
Functions (instead of just containing Parameters for the one main
P2
DM P R M
RO EFERENCE ANUAL