Alesis DM Pro Reference Manual page 33

Turning VALUE further clockwise will move you to the DELAY Function,
then to the PITCH Function and finally to the EQ Function. Turning the
VALUE encoder counterclockwise will return you to the previous Effects
Function.
2. To select the parameters within an Effect Function, press the CURSOR >
button so that the cursor is beneath the parameter of the Effect Function:
Now turn the VALUE encoder to scroll through the various parameters
within the Effect Function. For example, turning VALUE once clockwise
from the above state will display Page 2 of the REVERB Function:
3. To adjust the parameter, press the CURSOR > again so that the cursor is now
the beneath the parameter's value:
Turning the VALUE encoder will adjust the Effect Function Parameter. For
example, turning VALUE once clockwise will change the Reverb Type from
PLATE 2 to ROOM:
4. Pressing the CURSOR > once more will return the cursor cyclically to the
Effect Function where you can select other Effects to adjust as described
above.
For more detailed information on editing Drumkits, see "Chapter 4: Programming
Drumkits".
DM P R M
RO EFERENCE
P1
REVERB(Plate2)
Outpt Level: 99
P2
REVERB(Plate2)
Type: PLATE 2
P2
REVERB(Plate2)
Type: PLATE 2
P2
REVERB (Room)
Type: ROOM
This tutorial is meant as a brief overview of the DM Pro for the
purposes of getting you and up and running as soon as possible.
This section is not, under any circumstances, to be considered a
complete exploration of the unit.
ANUAL
A Brief Hands-On Tutorial
3 3