Alesis DM Pro Reference Manual page 130

Global Functions
The COPY EFFECT Command
The Copy Effect Command is a Drumkit utility that allows you to Copy the
Parameter Values of one Drumkit's Effect into another Drumkit.
Like the Copy Sound Command, once in the Global Store Function, press
[CURSOR>] to advance to the Copy Effect Command.
Move the cursor beneath the Drumkit number to which you wish to copy the current
Drumkit's Effect:
COPY EFFECT TO
KIT 000 (STR)
Note that you can also copy the Effect of a Drumkit other than the current Drumkit
into the current Drumkit's Effect by adjusting the Value for the Copy
COPY KIT 005 TO
EFFECT (STR)
Once you have made your selection, press [STORE] to initiate the Copy.
The INITIALIZE SOUND Command
This Command allows you to initialize all Parameter Values of an individual Sound
within a DM Pro Drum to their default Values.
To initialize a Sound, select the Sound you wish to initialize by moving the cursor
beneath the Sound Value:
INITIALIZE
SOUND 1 (STR)
Once you have selected the Sound you wish to initialize, press [STORE] to complete
the Command.
The COPY KIT TRIG Command
With this Command you can copy the entire set of Trigger/MIDI Note Number
assignments from the Edit buffer to any of the 64 Drumkits, or from any of the 64
Drumkits into the Edit buffer.
Note that this is not related to the Trigger Setups.
To copy the Drumkit's Trigger assignments, move the cursor to the desired location
on either the top line or the bottom line of the display. Then use the VALUE wheel to
select your target and/or destination Drumkits:
COPY KIT TRIG TO
1 3 0
CAUTION! Initializing a Sound will erase all edits you may have
made to that Sound. Use this Command carefully.
source
:
DM P R M
RO EFERENCE ANUAL