Basic Midi Setup - Alesis DM Pro Reference Manual

A Brief Hands-On Tutorial
B MIDI S
ASIC
Set the Basic MIDI Channel to receive incoming data on your desired channel by
pressing MIDI, and then turning the VALUE encoder clockwise to select Page 1. The
display will read:
Basic Channel:01
Global Edit
Press the CURSOR > button once so that the cursor moves beneath the channel
number:
Basic Channel:0 1
Global Edit
Now adjust the number to your desired MIDI Channel setting using the VALUE
encoder.
Tip: General MIDI always uses MIDI Channel 10 for drums, so setting the Basic
Channel to 10 is usually a good starting place. Also, if you are using the DM Pro
in a MIDI environment, make sure that your controller is set to transmit on the
same MIDI channel to which you set the DM Pro.
2 4
To begin the tutorial, first plug in your DM Pro per the connections
described in the "Connections Chart" in the previous chapter.
ETUP
P1
P1
DM P R M
RO EFERENCE ANUAL