Operating Procedure In Normal Condition - Siemens RAJA+ Installation, Maintenance & Troubleshooting Manual

Installation, Maintenance & Troubleshooting guide | Version 03

3.5: Operating procedure in normal condition

Table: 11 FASD starter operating sequence in normal condition
7A 7B
LMR-A 3 main
Mode supply
Manual ON
Auto ON
Bypass ON
7J
Starter
Operation
OFF
OFF
OFF
Starter operation:
LMR-A: Manual mode
7A : Keep the LMR-A in Manual mode.
7B : Switch ON 3-Phase incoming main supply.
7C : Turn ON the rocker switch
7D : Amber LED will start blinking for a period of min 0.5 min.
7E : 0.5 min is the default setting which can vary from min 0.5 min to max.5min.
7F : After the ON-delay duration, amber LED will ON continously indicating that the incoming supply is Healthy
(Assuming incoming supply is healthy).
7G : Press the green push putton for switching ON the starter.
7H : Starter gets switched ON
7I : Green LED turns ON indicating that the starter is ON.
7J : Starter switches OFF automatically after water tank level reach P3 sensor level.
7K : Green LED turns OFF indicating that the starter is OFF.
7L : Amber LED indication remains continous ON.
7M : Switch OFF the 3-phase incoming main supply.
7N : Amber LED indication gets turned OFF indicating that there is no incoming main supply.
11 10
7C 7D
Rocker Amber
switch LED
Blink
ON (On-delay
duration)
Blink
ON (On-delay
duration)
Blink
ON (On-delay
duration)
ON operation
7K
Green
LED
OFF
OFF
OFF
OFF operation
7E 7F
LMR-A Amber
On-Delay LED
0.5-5min ON
0.5-5min ON
0.5-5min ON
7L
Amber
LED
ON
ON
ON
7G 7H
'ON' Push Starter
button Operation
ON ON
NA ON
ON ON
7M
3 main Amber LED
supply indication
OFF
OFF
OFF
7I
Starter
Operation
ON
ON
ON
7N
OFF
OFF
OFF