Input Select; Input Route; Aux Routing - Alesis CADI Owner's Manual

CADI, Appendix C
I S
NPUT ELECT
This button flashes for 10 seconds when the mode is active; the display says "Use track
input switches." If you don't press any track input buttons during this time (or if there is
any 10-second period during input selection when no switches are pressed), the function
times out, then reverts to the previously-exited page. The CADI's track input buttons will
light to indicate digital input, and turn off to indicate analog input (as confirmed by the
display on corresponding M20s). When the selected input is digital and no clock reference
is detected, the associated Input button flashes until the M20 receives a valid clock.
I R
NPUT OUTE
This button flashes for 10 seconds when the mode is active. If you don't press any Input
Enable buttons during this time (or if there is any 10-second period during input route
selection when no buttons are pressed), the function times out, then reverts to the
previously-exited page.
If all inputs are set to analog, press Input Route once to select analog routing; use the Input
Enable switches to choose the type of routing, as with the M20. When in analog input
routing mode, the display indicates "Select analog input tracks." The input enable buttons
light for selected tracks.
If all inputs are set to digital, press Input Route once to select digital routing, and use the
Input Enables to select individual tracks. When in digital routing mode, the display
indicates "Select dig (Optical, Trk Copy, or I/O Card) Src Tracks." The Input Enable
buttons light for selected source tracks.
If the inputs are mixed between analog and digital, the digital routing page will appear
first. Press the Input Route button a second time to select analog routing. The Input Enable
buttons will update to reflect the selected routing mode.
A R
UX OUTING
This button flashes for 10 seconds when the mode is active, then reverts to the previously-
exited page. If you don't press any track input buttons during this time (or if there is any
10-second period during input route selection when no buttons are pressed), the function
times out, then reverts to the previously-exited page.
The display indicates "Select individual tracks or select AUX track for automated routing."
Use the track input buttons to select the channels that will be recorded to the associated
machine's AUX track when its AUX track is recording. A track input button lights when
that channel is selected as an input to the associated machine's AUX channel.
For automated AUX routing, press the desired machine's AUX track input button. The
AUX track input button lights when enabling automated AUX routing for that machine,
and the machine's corresponding Input Enables will turn off.
Selecting All Safe while in Manual Aux Routing mode disables aux routing; selecting All
Input sets all connected online channels for aux routing. All Safe and All Input have no
corresponding function when Auto Aux Routing is selected.
C-14 CADI M 1.00
ANUAL