Replay; Track Enable Groups; All Clear - Alesis CADI Owner's Manual

R
EPLAY
This locates back to the last location where play mode was initiated. This location cannot be
edited, and corresponds to the moment a button was pressed to initiate play.
After initiating Replay, the Replay button lights and the Rewind or FFwd button flashes.
Notes
Pressing Play updates the Replay location register, even when machines are playing,
except when pressing Play to punch out of Record mode.
In record mode, using the Play button to punch outdoes not update the Replay location
register.
When in One-button Record mode, and not in Play mode already, pressing Record to
punch in updates the Replay location register.
Play can be deferred during a Replay operation, so Replay will follow the same "Locate
Before Play: On/Off" rules as a normal locate.
Pressing Replay during a locate operation ends the locate and initiates Replay mode.
The Replay address is volatile, so turning the ID1 machine off then on again returns the
Replay address to its default value (00:00:00:00.00, ABS time).
T E
RACK NABLE
You may store and recall four different Groups of Track Enable settings as follows:
Action
Select track enables
that will make up a
Group
Store a Group
Recall a Group
Group settings are volatile, so turning the ID1 machine off then on again clears all Group
settings.
A C
LL LEAR
This button clears all record and input enabled tracks, including TC & Aux Enables, unless
All Input is enabled. In this case, All Clear disables only Record-enabled tracks (leaving
those tracks in Input mode). As the TC Track is not subject to All Input enable, pressing All
Clear disables a record/input-enabled TC track.
CADI M 1.00
ANUAL
G
ROUPS
You press...
Desired Input and
Record enable buttons
...and hold the Set
Group button, then
press one of the Track
Enable Group buttons
(1 - 4)
The desired Track
Enable Group button
(1-4)
Appendix C, CADI
You see...
Corresponding Input
and Record enable
buttons are lit or
flashing
The display shows
"Track Group n
Stored," where n is
the Track Enable
Group button you
selected
Input and Record
enable buttons
associated with the
Group are lit or
flashing
C-11