Alesis GuitarFX User Manual page 30

10
EFFECT Knob Settings
FX2 (Multi-Effect Module 2, Stereo Effects)
This module gives you a choice of stereo effects. These effects include all those
found in FX1 except for Flanger, Rotary Speaker, Chorus and Pitch Transpose.
FX2 also gives you the following additional effect.
PARAM (Direct-Control Parameter for FX2)
These parameters work exactly the same way as the direct-control parameter for
FX1, with the following addition.
30
For Slow Attack, indicates the rate of the attack.
For Leslie, indicates the rate of the speaker rotation.
For Pedal Pitch Transpose Up and Down, indicates the amount of
pitch change in 1/4 semitones (from 1/4 semitone to more than 2
octaves). Wet/dry mix is fixed at 100% wet.
For Cry, indicates the sensitivity of the filter modulation
For Pitch Transpose with a fixed interval, indicates the wet/dry
mix from 0 (100% dry) to 10 (50% wet, 50% dry) to 20 (100%
wet).
Indicates that the control pedal controls the parameter.
Indicates that the effect assigned to the FX1 module does not have
a direct-control parameter (for example, Pedal Wah) or that FX1 is
off.
Auto Phaser
A phaser for which the delay is controlled by playing intensity.
For Auto Phaser, indicates the rate of the effect.