Subscribe to Our Youtube Channel
Related Manuals for Scubatech R2 ICE
Summary of Contents for Scubatech R2 ICE
- Page 1 SCUBATECH DEMAND REGULATORS R 2 ICE, R 2 SPECIAL, R 5 ICE, R 5 TEC, V 2 ICE USER MANUAL WARRANTY CARD SERVICE BOOK...
-
Page 2: Technical Specifications
Read this manual thoroughly and carefully before using this demand regulator. This demand regulator’s manual cannot be treated as a substitution for a specialized diving training conducted by a certified instructor. Scubatech demand regulators must be used only in the way as shown in the following manual. WARNING Our demand regulators were tested according to the requirements of EN 250:2003/A1:2006 norm. -
Page 3: Operation
They are designed to be used with air cylinder(s) with working pressure of up to 30 MPa (300 atm). SCUBATECH is not responsible for malfunction of regulator if it was used in an improper way; if unoriginal spare parts were used for its servicing or if servicing was done by an unqualified person. - Page 4 R 5 TEC, V 2 ICE are equipped with adjustable inhalation resistance knob. When the knob is in a closed position, then the diver needs more effort to take a breath and the regulator is less sensitive to sudden changes of pressure. When the knob is in an open position, then breathing is easier.
- Page 5 WARNING: DO NOT ATTACH A LOW PRESSURE HOSE TO A HIGH PRESSURE PORT AND DO NOT USE ANY REDUCTIONS ON LP OR HP HOSES. Properly arrange hoses supplying: BCD, dry suit, etc. Inspect the demand regulator. Inspect hose(s) and hose connections. See if the mouthpiece is properly mounted. Test the under pressure tightness in the following way: - Put the mouthpiece of first stage of breathing apparatus R 2 ICE, R 2 SPECIAL, R 5 ICE, R 5 TEC, V 2 ICE into the mouth;...
-
Page 6: Post- Dive Procedures
PROCEDURES DURING DIVING It is recommended to breath steadily from the regulator and to avoid quick and shallow breathing. The regulator is designed in a way that the air bubbles flowing from it during the dive do not worsen visibility. The only exception is when the diver who is under water looks into the surface while exhaling at the same time. -
Page 7: Diving In Cold Water
recommended to rinse the regulator after each dive in fresh, warm water according to the regulator’s manual. Using any type of spray may result in damaging the plastic parts of the regulator. Do not carry the cylinder holding the first stage. The cylinder’s handle serves this function. -
Page 8: Warranty
Dismantling or assembling the components of the demand regulator must only be conducted by authorized persons. WARRANTY All of the information on warranty of the SCUBATECH demand regulators can be found in the warranty card below. Inspections or servicing conducted by unauthorized persons lead to the loss of warranty. -
Page 9: Warranty Card
WARRANTY CARD of SCUBATECH pressure regulator, breathing apparatus The warranty coverage has a ten year warranty by SCUBATECH for the first user of the pressure regulator, breathing apparatus and ensures that it is free from production and material defects . The following requirements must be fulfilled for the validity of the warranty card: 1. - Page 10 ANNUAL INSPECTIONS AND INFORMATION ON INSPECTIONS SERVICE NOTES STAMP AND DATE PERSON NAME SIGNATURE...
Need help?
Do you have a question about the R2 ICE and is the answer not in the manual?
Questions and answers