Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for EKEN V5
Summary of Contents for EKEN V5
- Page 1 Video Doorbell User Manual 3.1...
- Page 2 Features 1. Motion Sensor 5. Microphone 2. Light Sensor 6. Doorbell / Reset Button 3. 6 Hidden Infrared Lights 7. Indicator Light 4. Wide-angle Lens 8. Speaker OPEN 9. Restart Button 11. AC 8V~24C 10. Micro USB Port Power Interface For Battery Charging 12.
- Page 3 Indicator Light Indicator light flashing RED The device is reconnecting to the Wifi network. Please wait. Indicator light flashing RED and BLUE alternately Low battery. Please recharge your batteries. In the box Video Doorbell Video Mounting User Manual Doorbell Bracket 5 Anchors 5 Mounting Security Screw /...
- Page 4 Charge batteries 1. Remove the battery tab. 2. Insert 18650 batteries positive end facing up, as shown on the device. Rechargeable 18650 Battery 3. Fully charge batteries by connecting your device to a USB charger using a Micro USB cable. It takes about 14 hours for batteries to fully charge.
- Page 5 Connect the wires (optional) Connect the wires coming out of your wall to the screws on the back of your doorbell. Either wire can connect to either screw. The order doesn’t matter. AC 8V~24V Bell Transformer Set up your Video Doorbell Before You Start 1.
- Page 6 Set up your device in the Aiwit app. To pair your device, follow the steps below and in-app instructions. 1. Open Aiwit App and log in to your account. 2. To add your camera, select the + icon. 3. Select Video Doorbell. 4.
- Page 7 Install your Video Doorbell Mark drill holes and use a bit to drill holes in your wall. Insert anchors and secure your doorbell with a security screw and mounting screws. Step 1 Wall Step 2 Step 3 Step 4 Slide Down Wall Wall...
- Page 8 Frequently asked questions How long do my videos stay in my account? Your videos are stored in the Free Cloud for up to 7 days. How to RESET the doorbell Press and hold the Doorbell Button for 8 seconds. Then follow the in-app instructions to finish your Wi-Fi setup.
- Page 9 Is 5GHz Wi-Fi supported? No. Only 2.4GHz Wi-Fi is supported. How to adjust Motion Detection Sensitivity From the home page, tap the Motion Detection icon. Motion Detection Sensitivity • Fast: Records and notifies you about every motion. Shortest battery life. •...
- Page 10 Set up your Wireless Chime (Optional) Set up your Wireless Chime (Optional) Connect the video doorbell to the doorbell chime, and get instant alert in your home when someone rings the doorbell. The chime plugs into any wall outlet, you can place it anywhere in the home.
- Page 11 Set up your chime with the video doorbell. Step 1 Before the setup process, be sure your video doorbell has connected to your phone and plug in your chime.
- Page 12 Step 2 Step 3 Press the Connect Button. Press the Doorbell Button to pair your doorbell to the chime. Step 4 Step 5 Press the Tune Button to Press the Doorbell Button cycle through 38 different again to make sure it’s the tunes and select a tune.