Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for EKEN V6
Summary of Contents for EKEN V6
- Page 1 Video Doorbell User Manual 2.0...
- Page 2 Features 1. Microphone 5. Push Button 2. Wide-angle Lens 6. LED Indicator 3. Light Sensor 7. Speaker 4. Hidden Infrared Lights Restart Button 9. Micro USB Port (Battery Charging)
- Page 3 Indicator Light Indicator light flashing RED The device is reconnecting to the Wifi network. Please wait. Indicator light flashing RED and BLUE alternately Low battery. Please recharge your batteries. In the box Video Mounting Tape Doorbell Bracket 5 Anchors 5 Mounting 2 Security Screws Screws...
- Page 4 Charge batteries 1. Remove the battery tab. 2. Insert 18650 batteries positive end facing down, as shown on the device. Rechargeable 18650 Battery 3. Fully charge batteries by connecting your device to a USB charger using a Micro USB cable. It takes about 14 hours for batteries to fully charge.
- Page 5 Set up your Video Doorbell Step 1 Scan the QR codes below or search for Aiwit on the Apple app store or Google Play to download the app. The app will walk you through setting up your doorbell. Aiwit Android / iOS App Download Step 2 Step 3...
- Page 6 Step 4 Step 5 You will receive an email Enter your email and with the confirmation password, then tap Log in. code. Please enter the code and tap Confirm. Step 6 Step 7 Tap + . Tap Doorbell Scan and select Video doorbell.
- Page 7 Step 8 Step 9 Press and hold the doorbell Tap Yes. button for 8 seconds until the doorbell light is flashing red. Tap Next. Step 10 Step 11 Find or enter the name of Scan the QR code using your Wifi network and the doorbell camera.
- Page 8 Step 12 Step 13 If pairing is successful, you After setup, tap the Live will see a message as View in the Aiwit app to below. see live video from your doorbell.
- Page 9 Install your Video Doorbell Mark drill holes and use a bit to drill holes in your wall. Insert anchors and secure your doorbell with mounting and security screws. Step 1 Step 2 Step 3 Step 4 Slide Down Wall Wall Wall Tighten The Screw...
- Page 10 Frequently asked questions How to RESET the doorbell Press and hold the Doorbell Button for 8 seconds. Then follow the in-app instructions to finish your Wi-Fi setup. How to share the device with my family Open the Aiwit app. From the home page, tap the Share icon.
- Page 11 Is 5GHz Wi-Fi supported? No. Only 2.4GHz Wi-Fi is supported. How to enable Notifications on my phone To do this, you need to give permission for the Aiwit app to access to your microphone and enable notifications. Follow these steps to enable notifications. 1.
- Page 12 Set up your Wireless Chime (Optional) Connect the video doorbell to the doorbell chime, and get instant alert in your home when someone rings the doorbell. The chime plugs into any wall outlet, you can place it anywhere in the home. NOTICE: The video doorbell is only compatible with our wireless chime, and not compatible with traditional doorbell chimes.
- Page 13 Set up your chime with the video doorbell. Step 1 Before the setup process, be sure your video doorbell has connected to your phone and plug in your chime.
- Page 14 Step 2 Step 3 Press the Connect Button. Press the Doorbell Button to pair your doorbell to the chime. Step 4 Step 5 Press the Tune Button to Press the Doorbell Button cycle through 38 different again to make sure it’s the tunes and select a tune.
Need help?
Do you have a question about the V6 and is the answer not in the manual?
Questions and answers